01 Our services
Production that ships what was prototyped.
Retail display production is the fabrication, quality control, kitting, and pre-ship inspection that turns an approved prototype into a packed, labeled unit ready for the retailer. arX manages production end-to-end with our vetted fabrication network — pilot run, full production, in-line QA at every checkpoint, kitting with plain-language install instructions, and a final inspection before each program ships. The fixture you approved is the fixture that ships.
02 What it is
The boring stuff that decides whether the program works.
Production is where a retail display program gets won or lost. Not in the slide deck. Not in the prototype review. On the line, when 5,000 units are being built to the same spec, packed the same way, and inspected the same way — every single one of them.
Our production discipline runs on three principles: what's prototyped is what's produced (no mid-stream material swaps); inspect at every checkpoint (not just at the end); and kit like the install team has never seen the display before — because most of the time, they haven't.
03 What's included
What a production engagement covers.
Every engagement includes these components, adapted to your program scope and timeline.
-
01
Production setup
Tooling, jigs, line layout, and pilot-run validation.
-
02
Pilot run
First articles validated against the signed prototype before the full run starts.
-
03
Full production
In-line QA at every major checkpoint, not just at final inspection.
-
04
Print & finish
Printing, finishing, and graphics-printed-to-substrate work, fully managed.
-
05
Kitting
Every unit kitted as a complete install package: hardware, graphics, instructions, accessories.
-
06
Instruction sheets
Plain-language, visual instructions that survive a kit and read at retail.
-
07
Labeling & packaging
Retailer-spec labeling, freight-optimized packaging, fragile/hazardous handling where required.
-
08
Pre-ship inspection
Final pass before the program ships.
-
09
Production reporting
Unit counts, defect rates, and any deviations documented for client records.
04 Methodology
We catch problems on unit 50. Not unit 5,000.
In-line QA, not end-line QA
End-of-line inspection is too late. By then, the defect has been reproduced four thousand times and the only options are scrap or rework — both expensive, both time-killing.
arX runs QA inspection at every major production checkpoint listed on the right. Any unit that fails a checkpoint stops the line until the cause is identified.
- 01 Material intake — what showed up is what was specified
- 02 Print and finish — color, registration, durability
- 03 Sub-assembly — joinery, hardware seating, structural integrity
- 04 Final assembly — fit, finish, function tests
- 05 Pack-out — completeness, instruction inclusion, packaging integrity
Pack like the install team has never seen the display.
Most field install failures aren’t field failures — they’re pack-out failures. A missing fastener. An instruction that assumes shoppers have read the planogram. A graphic that arrived in a box labeled for a different store.
arX builds the kit for the actual install scenario:
- Every unit kitted complete — no “scavenger hunt” parts
- Visual install instructions in plain language (no engineering jargon)
- Retailer-spec labeling (DC, store, region, planogram code, whatever the retailer requires)
- Freight packaging engineered for the actual carrier and route
- Optional: install videos referenced via QR code on the carton
Predictable at scale.
We don’t ramp from a pilot run to a national rollout without proving the production line at every step. The pilot validates the engineering. The first quarter of full production validates the line. We adjust before we scale — not after.
That’s why our delivery dates are dates we hit. Predictability at scale is a production discipline, not a sales promise.
Built for the people who get the call when something goes wrong.
If you’re on the Procurement or Store Ops side, you’ve seen production fail in every direction it can fail — late, off-spec, mis-kitted, damaged. We’ve worked with enough Procurement and Store Ops teams to know exactly which failure modes scare you most. Ask us about ours. We’ll tell you what’s failed, what we fixed, and what we won’t do again.
06 Hand-off
Production hands off a packed, labeled, inspected unit. Fulfillment takes it from there.
07 Industries we produce for
Industries we produce for.
08 Display types we produce
Produce every format we design.
10 Production FAQs
Production FAQs. Direct answers.
All production FAQs01. What is a typical lead time for a custom retail display?
Temporary POP typically run 4–8 weeks from approved design to in-store. Permanent fixture programs run 12–20 weeks including prototyping and engineering review.
02. Do you handle rollouts to multiple stores?
Yes. arX manages multi-store rollouts from 5-store pilots to 500+ store national programs — including direct-to-store, DC, or hybrid distribution; store-level labeling and instructions; and install support.
03. How long does a custom retail display last?
Temporary POP last 4–12 weeks; permanent store fixtures last 1–7+ years depending on materials, traffic, and environment.